Shortcuts
Buttons Cut-off Screen / Not showing
USER PROFILE / EMAIL ADDRESS / VIN WAS NOT FOUND
This is caused by either:
No WiFi Connection
You did not enter your registered email address
Your Vehicle Identification Number (VIN) does not match what is on your account profile
You do not have the driver installed
You do not have the USB connected to the PC
You are not connected to the vehicle
The vehicle’s ignition is not on accessory mode
Make sure your real-time protection is disabled
CHECK TO SEE IF DRIVER WAS INSTALLED
Following the installation instructions, you would have installed the driver. This driver is used to communicate with the USB cable and the vehicle. Go out to your vehicle. Plug in the COMPORT PRO usb cable into your PC and the other end into the COMPORT PRO cable dongle and the other end into your vehicle’s OBD port. Once done, see below:
Go to your windows search bar, type in “driver manager”
Click and open the device manager. After opening, scroll down to the bottom. You will be looking for Vehicle Pass Thru Interfaces. If you do not see this listed, then you did not complete installing the driver. Please re-install the openport driver and you will be good to go.
BUTTONS CUT OFF / NOT SHOWING
If you launch your COMPORT PRO TUNING SUITE and the buttons are cut off or not showing, do not be worried, this is an easy fix.
Right click on your desktop background and select "display settings"
Then click on 100%
