Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 24 Current »

STAGE REQUIREMENTS || PERFORMANCE PACKAGES

STAGE 1 || AMR 750 PACKAGE

  • Stock Fuel System

  • Stock Intake System

  • Stock Headers

  • Stock Exhaust System

  • Stock Intercooler System

  • COMPORT PRO TUNING SUITE

STAGE 2 || AMR 800 PACKAGE

  • Stock Fuel System

  • Stock Intake System

  • Upgraded Headers

  • Upgraded Exhaust System

  • Stock Intercooler System

  • COMPORT PRO TUNING SUITE

STAGE 3 || AMR 850 PACKAGE

  • Stock Fuel System

  • Stock Intake System

  • Upgraded Headers

  • Upgraded Exhaust System

  • Upgraded Intercooler System

  • COMPORT PRO TUNING SUITE

OCTANE REQUIREMENTS FOR STAGE(S) || PERFORMANCE PACKAGES

PUMP FUEL

  • 91 Octane / 95 Ron

  • 93 Octane / 98 Ron

RACE GAS

  • 100 Octane

  • 116 Octane

ETHANOL

  • E30 (30% Ethanol / 70% Pump)

  • E40 (40% Ethanol / 60% Pump)

Lower Octane Warning: Do not run lower octane that is required by your supplied calibration will increase engine wear and may result to engine damage. Only run the octane that your calibration was designed for. For example, never run 91 octane on a 93 octane calibration.

POWER OUTPUT MEASURED BY HORSEPOWER & TORQUE

The power output charts displayed below represent power gains done in-house on a development vehicle. The power outputs can vary by octane, barometric pressure, sea-levels, engine build quality and dynamometer (dyno) brands. These power plots show the delta and gains our stage package(s) and calibration(s) achieve during development and now production.

  • DELTA: This is the overall gain achieved

  • MAX GAIN: This is the largest delta between any two points on the power chart at a specific point

  • PEAK GAIN: This is the overall delta at the highest point

STAGE 1 || AMR 750 PACKAGE

STAGE 2 || AMR 800 PACKAGE

STAGE 3 || AMR 850 PACKAGE

  • No labels