| Tip |
|---|
POWER PLOT |
| Iframe | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Tip |
|---|
OBD AVAILABILITY |
| Tip |
|---|
COMPORT PRO TUNING SUITE FEATURE SUPPORT |
OBD FLASH SUPPORTED
OBD DIAGNOSTIC SUPPORTED
OBD DATALOGGING SUPPORTED
| Info |
|---|
STAGE REQUIREMENTS || PERFORMANCE PACKAGES |
STAGE 1 || AMR P1 PACKAGE
Stock Fuel System
Stock Intake System
Stock Downpipes
Stock Exhaust System
Stock Intercooler System
COMPORT PRO TUNING SUITE
STAGE 2 || AMR P2 PACKAGE
Stock Fuel System
Stock Intake System
Upgraded Downpipes
Optional: Upgraded Exhaust System
Stock Intercooler System
COMPORT PRO TUNING SUITE
STAGE 3 || AMR P3 PACKAGE
Upgraded Fuel System
Stock Intake System
Upgraded Downpipes
Optional: Upgraded Exhaust System
Stock Intercooler System
COMPORT PRO TUNING SUITE
| Info |
|---|
OCTANE REQUIREMENTS FOR STAGE(S) || PERFORMANCE PACKAGES |
PUMP FUEL
91 Octane / 95 Ron
93 Octane / 98 Ron
RACE GAS
100 Octane
116 Octane
ETHANOL
E30 (30% Ethanol / 70% Pump)
E40 (40% Ethanol / 60% Pump)
| Note |
|---|
Lower Octane Warning: Do not run lower octane that is required by your supplied calibration. A lower octane will increase engine wear and may result to engine damage. Only run the octane that your calibration was designed for. For example, never run 91 octane on a 93 octane calibration. |
| Info |
|---|
POWER OUTPUT MEASURED BY HORSEPOWER & TORQUE |
The power output charts displayed below represent power gains done in-house on a development vehicle. The power outputs can vary by octane, barometric pressure, sea-levels, engine build quality and dynamometer (dyno) brands. These power plots show the delta and gains our stage package(s) and calibration(s) achieve during development and now production.
DELTA: This is the overall gain achieved
MAX GAIN: This is the largest delta between any two points on the power chart at a specific point
PEAK GAIN: This is the overall delta at the highest point